Primary Keyword: Pink and ivory crochet bedspread
Secondary Keywords: crochet bedspread pattern, crochet shell stitch, raised fan crochet stitch, scalloped crochet border, matching crochet pillow covers, handmade crochet bedding, textured crochet blanket
Meta Description: Create an elegant pink and ivory crochet bedspread with raised fan stitches, textured shell patterns, a layered scalloped border, and matching pillow covers.
Elegant Pink and Ivory Crochet Bedspread
Bring a soft, romantic touch to your bedroom with this elegant pink and ivory crochet bedspread. Featuring alternating textured shell-stitch rows, raised fan motifs, delicate openwork details, and a beautiful layered scalloped border, this handmade design creates a coordinated look when paired with matching crochet pillow covers.
The combination of pink and warm ivory gives the bedspread a gentle, timeless appearance that complements vintage, cottage, farmhouse, and traditional bedroom decor. The raised stitches add dimension to the main fabric, while the oversized scallops create a decorative finish along the hanging edges.
Skill Level: Intermediate to Advanced
Terminology: US Crochet Terms
Finished Bedspread Size: Approximately 90 × 100 inches (229 × 254 cm), excluding decorative fringe
Matching Pillow Size: Approximately 18 × 18 inches (46 × 46 cm)
Pattern Note: This is a photo-inspired reconstruction. The exact stitch counts and construction of the pictured bedspread cannot be determined from the image alone. The instructions below describe a related design featuring the same general construction, textured sections, and layered decorative border.
1. Materials Needed
- Pink medium-weight cotton or cotton-blend yarn: approximately 3,500–4,500 yards
- Warm ivory medium-weight yarn: approximately 3,500–4,500 yards
- Crochet hook: 4.5 mm or size needed for gauge
- Yarn needle
- Stitch markers
- Scissors
- Measuring tape
- Three 18-inch pillow inserts
- Optional cotton fabric for pillow backing
Yarn quantities are estimates and will vary depending on the selected yarn, personal tension, gauge, and depth of the decorative border.
2. Crochet Abbreviations
| Abbreviation | Meaning |
|---|---|
| ch | Chain |
| sl st | Slip stitch |
| sc | Single crochet |
| hdc | Half double crochet |
| dc | Double crochet |
| tr | Treble crochet |
| sp | Space |
| sk | Skip |
| st(s) | Stitch(es) |
| RS | Right side |
| rep | Repeat |
| FO | Fasten off |
3. Special Stitches
Raised Fan Stitch
Work 7 double crochet stitches into the indicated chain space. Gently separate the stitches to spread them into a wide decorative fan.
Puff Stitch
Yarn over, insert the hook into the indicated stitch, yarn over again, and pull up a loop. Repeat three more times in the same stitch. Yarn over and draw through all loops on the hook, then ch 1 to secure the puff.
Decorative Shell
Work 9 dc into the same chain space. This creates the rounded shell shape used throughout the textured sections.
Front Post Double Crochet (FPdc)
Yarn over and insert the hook from front to back and then from back to front around the post of the indicated stitch. Yarn over, draw up a loop, and complete the stitch as a regular double crochet.
Picot
Ch 3, then work a sl st into the first chain to form a small decorative point.
4. Main Bedspread Pattern
The main body is crocheted in horizontal rows, alternating pink and ivory sections. Once the rectangular body is complete, a separate layered scalloped border is added around the edges.
Foundation
Using ivory yarn, make a foundation chain with a multiple of 12 plus 4 stitches.
For a large queen-size bedspread, begin with approximately 280 chains, then adjust the total according to your gauge.
Section A – Ivory Foundation and Shell Rows
Row 1: Work dc into the fourth chain from the hook. Continue working 1 dc into each remaining chain. Turn.
Row 2: Ch 3, sk 2 sts, work 7 dc into the next stitch, sk 2 sts, and work sc into the next stitch. Repeat this shell arrangement across the row, adjusting the spacing evenly at the end.
Row 3: Ch 3, work 1 sc into each dc of the shells, placing ch-1 spaces between shell groups. Turn.
Row 4: Ch 3, work 7 dc into each designated ch-1 space between shell groups. Secure each fan with sc between the shells.
Row 5: Work an evenly spaced row of dc to straighten the top edge.
Repeat the shell arrangement until the ivory decorative section measures approximately 4–5 inches.
Section B – Pink Raised Fan Rows
Join pink yarn at the beginning of the next row.
Row 1: Ch 3 and work dc evenly across the row.
Row 2: Ch 3, sk 2 sts, work 7 dc into the next stitch, sk 2 sts, and work sc into the next stitch. Repeat across the row, maintaining even spacing.
Row 3: Work sc along the top of the shells, with ch-1 spaces separating the groups.
Row 4: Work raised fans of 7 dc into the chain spaces, positioning them to create an overlapping textured pattern.
Row 5: Work a dc row to straighten the section.
Continue until the pink section measures approximately 3–4 inches.
Section C – Textured Transition Rows
Using ivory yarn:
Row 1: Work 1 sc into every stitch.
Row 2: Ch 3 and work dc across the row.
Row 3: Alternate FPdc and dc stitches to create a textured ridge.
Row 4: Work sc evenly across.
Change to pink yarn and repeat one additional textured ridge if desired.
5. Repeating the Bedspread Design
Continue alternating the three sections to create the long decorative stripes across the bedspread.
| Section | Yarn Color | Approximate Height |
|---|---|---|
| A | Ivory | 4–5 inches |
| B | Pink | 3–4 inches |
| C | Ivory/Pink | 1–2 inches |
Repeat the pattern until the main rectangular body reaches the desired length.
For a queen-size version, aim for approximately 90 × 100 inches before adding the hanging decorative border. Adjust the width and length to suit your bed.
Keep the stitches consistent and measure the fabric regularly to help prevent uneven edges.
6. Decorative Layered Scalloped Border
The oversized, overlapping shell border is the most distinctive feature of this design. It combines large pink fans with smaller ivory shells to create a dimensional, cascading finish.
Round 1 – Foundation Border
Join ivory yarn at any corner.
Work sc evenly around all four sides of the bedspread, placing 3 sc into each corner.
Join with a sl st.
Round 2 – Pink Shell Foundation
Change to pink yarn.
Work a row of evenly spaced chain loops around the edge:
Ch 1, sc into the first stitch, ch 5, sk 4 stitches, and sc into the next stitch.
Repeat around, adjusting stitch spacing near the corners.
Round 3 – Large Pink Scallops
Into each ch-5 space, work the following sequence:
1 sc, 2 hdc, 7 dc, 2 hdc, 1 sc.
This creates a rounded, oversized scallop along the edge.
Round 4 – Ivory Accent Edge
Join ivory yarn.
Work sc along the curved top of each pink shell.
Add a picot at the center of every scallop.
Continue around the bedspread.
Round 5 – Second Layer of Shells
For a deeper border, work another row of chain loops behind the first layer, attaching them to the foundation stitches.
Use ivory yarn to create smaller shells in the new loops.
Work 9 dc in each loop, anchoring the shells with sc between groups.
Round 6 – Final Pink Layer
Repeat the large shell construction with pink yarn along the lower edge.
Finish each scallop with an ivory picot or contrasting single crochet edging.
Finishing Tip: To achieve the cascading appearance of the inspiration photo, add two or three tiers of overlapping scallops along the three visible hanging sides of the bedspread. Keep the headboard edge flatter for comfortable use.
7. Matching Crochet Pillow Covers
Make three pillow covers using the same yarn colors and decorative stitch pattern as the bedspread.
Front Panel
Using ivory yarn, chain enough stitches to measure approximately 18 inches.
Rows 1–3: Work dc evenly across.
Rows 4–7: Work ivory decorative shell rows following Section A.
Rows 8–12: Change to pink and work raised fan stitches following Section B.
Rows 13–17: Switch to ivory and repeat the shell design.
Continue alternating colors until the square reaches 18 × 18 inches.
Back Panel
Create two simple rectangular crochet panels using ivory yarn and dc stitches.
Each rectangle should measure approximately 18 inches wide by 10 inches tall.
Assembly
- Place the front panel facing downward.
- Position the two back panels over the front, overlapping them in the center.
- Crochet the pieces together around all four edges using sc.
- Add a narrow pink scalloped edging.
- Insert the pillow through the envelope opening.
- Repeat for the remaining two pillows.
8. Professional Finishing
Weave in all loose yarn ends securely using a tapestry needle.
Lightly block the main bedspread to relax the fabric and even out the shell patterns.
Shape the large border scallops while the fabric is damp, then allow the entire piece to dry completely.
Check the finished measurements before placing the bedspread on the bed.
For an elegant presentation, spread the bedspread smoothly over the mattress and arrange the matching pink and ivory pillows against the headboard.
9. Customization Ideas
Although this version uses pink and ivory, the same design can inspire different bedroom styles through alternative color combinations.
- Pink and Ivory: A romantic, soft combination suited to vintage and cottage-inspired interiors.
- Dusty Rose and Cream: A muted, traditional palette with a gentle appearance.
- Sage Green and White: A fresh botanical combination.
- Burgundy and Champagne: A rich palette for an elegant, traditional bedroom.
- Navy Blue and Ivory: A timeless combination with a sophisticated finish.
When adapting the color palette, keep the original placement of the main body sections and decorative border colors consistent within the chosen version.
10. Care Instructions
Hand wash or machine wash on a gentle cycle, depending on the yarn label.
Use cold water and mild detergent. Avoid harsh bleach.
Dry flat whenever possible to protect the raised shell patterns and maintain the shape of the scalloped edging.
Avoid hanging the bedspread while wet, as its weight may stretch the stitches.
Always follow the care instructions for your chosen yarn, especially when working with cotton blends or other fibers that may behave differently during washing.
Frequently Asked Questions
1. What skill level is needed for this pink and ivory crochet bedspread?
This project is intended for intermediate to advanced crocheters. It uses several decorative stitches, including raised fans, shells, front post double crochet, and picot edging.
2. What yarn is recommended for the bedspread?
Medium-weight cotton or cotton-blend yarn is recommended in pink and warm ivory. The estimated quantity is approximately 3,500–4,500 yards of each color, although actual usage depends on gauge, yarn characteristics, and border depth.
3. Can I adjust the bedspread to fit a different mattress?
Yes. Adjust the foundation chain to change the width and repeat the main sections until you reach the desired length. Measure your work regularly and allow additional fabric for the hanging border.
4. How do I create the raised fan texture?
The raised fan is formed by working 7 dc into the designated chain space. Position the fans according to the instructions in the raised fan section to create the overlapping decorative texture.
5. How can I achieve a cascading scalloped border?
The layered effect comes from combining the large pink scallops with smaller ivory shells and a final pink layer. Adding two or three overlapping tiers along the three visible hanging sides creates a fuller decorative edge.
6. How do I keep the bedspread from developing uneven edges?
Maintain consistent stitch tension and measure the width and length regularly. Pay particular attention to the shell spacing and the foundation border around the corners.
7. Can the matching pillow covers be made without fabric backing?
Yes. The pattern describes crocheted envelope-style covers using a front panel and two overlapping back panels. Optional cotton fabric can be used for backing if desired.
Suggested Image Alt Text
Use descriptive alt text for images that accurately represent the finished project or the specific step shown.
- Featured image: Pink and ivory crochet bedspread with raised fan stitches and a layered scalloped border.
- Main body detail: Close-up of pink and ivory crochet shell-stitch rows with raised fan motifs.
- Border detail: Layered pink crochet scallops with ivory picot accents.
- Pillow covers: Matching pink and ivory crochet pillow covers arranged against a textured bedspread.
- Stitch detail: Raised crochet fans and decorative shell stitches in pink and ivory yarn.
Conclusion
This pink and ivory crochet bedspread combines textured shell stitches, repeating raised fans, and an elaborate layered scalloped border to create an elegant handmade bedroom set. The coordinating pillow covers complete the design and help bring the entire look together.
The soft pink and warm ivory palette works beautifully in romantic, vintage, cottage, and traditional bedrooms. With careful measurements, consistent stitch tension, and attention to the layered edging, this decorative crochet project can become a distinctive addition to your handmade home decor.
Publication and pattern note: The instructions are presented as a photo-inspired reconstruction, not as a verified reproduction of an exact original pattern. Before publishing or republishing a source pattern, confirm that you have the necessary permission or that the applicable license allows your intended use. Follow any required attribution and republication conditions. Rewriting wording or changing yarn colors does not, by itself, remove copyright protection.
Verification Report
- Color replacement 1: Olive Green → Pink.
- Color replacement 2: Warm Ivory → Warm Ivory (unchanged).
- Pattern preservation: The original tutorial order, stitch names, row and round numbers, measurements, yarn quantities, hook size, abbreviations, and stated construction instructions have been retained.
- Design preservation: The pink yarn replaces olive green in the same sections and border layers; ivory remains in its original role.
- Editorial note: The source describes the stitch counts and construction as a photo-inspired reconstruction. The original technical details have been retained rather than independently verified or altered.
