Frosted Lullaby Crescent Moon Crochet Pattern (Free Pattern)

Learn how to craft a beautiful, delicate Frosted Lullaby Crescent Moon with this free crochet pattern! Featuring lacy fan stitches and a textured bobble border, this delicate celestial ornament is worked in two soft, contrasting colors: classic cream and vibrant red.

Suspended vertically from a matching twisted cord, this small crochet crescent moon makes a stunning holiday ornament, nursery accent, or handmade gift.

Pattern Overview & Construction

• Skill Level: Advanced Beginner to Intermediate
• Terminology: US Crochet Terms
• Finished Size: 4.25 in (10.8 cm) tall from tip to tip $\times$ 2 in (5.1 cm) wide at the widest point (excluding hanging cord)
• Piece Size Before Border: 3.75 in (9.5 cm) tall $\times$ 1.5 in (3.8 cm) wide
• Border Depth: 0.25 in (0.6 cm) on every edge
• Number of Pieces: 1 (worked flat in rows, then finished with a border in the round)
• Yarn Weight: Fingering / #1 Super Fine (100% Mercerized Cotton)
• Crochet Hook Size: 2.25 mm (US B-1)

How It’s Made

The crescent moon body is crocheted in a single piece. You start by making a foundation chain along the inner curve and working six rows outward, alternating colors on every row. As fan stitches expand wider than the base rows beneath them, the fabric naturally bends into a beautiful crescent shape. A decorative cream bobble border worked over a single crochet base round finishes the edges, and a two-tone twisted cord creates the hanging loop.

Materials & Tools Needed

Yarn Recommendations

For crisp fan stitch definition and firm, popping bobbles, use a smooth mercerized cotton in fingering weight. Mercerized cotton holds its shape exceptionally well after blocking. Tip: Avoid fuzzy, textured, or highly stretchy yarns, as they obscure the lace detailing.

• Cream Yarn: Approx. 6 g (20 m / 22 yds) — Used for Rows 1, 3, 5, the border, and half of the cord.
• Red Yarn: Approx. 4 g (14 m / 15 yds) — Used for Rows 2, 4, 6, and half of the cord.

(Note: Yarn quantities include extra margin for gauge testing, joins, and the twisted cord.)

Tools & Notions

• 2.25 mm (US B-1) crochet hook
• Tapestry needle
• Scissors
• Rustproof blocking pins and blocking mat
• Spray bottle with water
• Optional: Fabric stiffener or light spray starch

Abbreviations & Special Stitches (US Terms)

• ch: chain
• sl st: slip stitch
• sc: single crochet
• sc2tog: single crochet 2 together (decrease)
• hdc: half double crochet
• dc: double crochet
• sk: skip
• st(s): stitch(es)
• RS: right side

Special Stitches

• Bobble: (Yarn over, insert hook in indicated st, pull up a loop, yarn over, draw through 2 loops) 3 times in the same st (4 loops on hook). Yarn over and draw through all 4 loops. The following sc locks the bobble in place. (Counts as 1 st).
• Fan Center: On a 3-st fan, the center is the 2nd st. On a 5-dc fan, it is the 3rd dc. On a 7-dc fan, it is the 4th dc.

Gauge & Sizing Checkpoints

• Gauge: 15 sc = 2 in (5.1 cm) using a 2.25 mm hook. (Stitch gauge is critical; row gauge is less important.)

Sizing Checkpoints

• After Row 1: Lies straight at this stage. Should measure 3.9 in (9.9 cm).
• After Row 2: Curve begins to form; approx. 0.5 in (1.3 cm) wide.
• After Row 4: Clear crescent shape; approx. 1 in (2.5 cm) wide at center.
• After Row 6: Measures 3.75 in (9.5 cm) tip to tip and 1.5 in (3.8 cm) wide.
• After Border: Measures 4.25 in (10.8 cm) tall and 2 in (5.1 cm) wide.

Gauge Adjustments: If your piece measures too large, switch to a 2.0 mm hook. If it measures too small, switch to a 2.5 mm hook. Re-test Row 1 after changing hooks. Keep stitch counts exact, as the crescent shape relies strictly on the stitch counts.

Step-by-Step Instructions: Crescent Moon Body

Color-Changing Technique

Fasten off at the end of every row, leaving a 4 in (10.2 cm) tail. Turn the piece. Join the new color in the first st of the new row (which was the last st of the row just finished). Weave in all yarn tails along the row ends before starting the border.

Foundation (Cream): Ch 30.

Row 1 (Cream): Sc in the 2nd ch from hook and in each ch across. Fasten off.

(Stitch Count: 29 sc)

This row forms the inner curve of the crescent.

Row 2 (Red – Fan Row 1): Join Red in first sc. Ch 1, sc in same sc, sk 1, 3 hdc in next sc, sk 1, sc in next sc. *Sk 1, 5 dc in next sc, sk 1, sc in next sc; repeat from * 4 more times (5 large fans total). Sk 1, 3 hdc in next sc, sk 1, sc in last sc. Fasten off.

(Stitch Count: 39 sts — 7 fans: two 3-hdc end fans and five 5-dc fans, plus 8 sc)

Math check: uses 1 + 4 + (5 $\times$ 4) + 4 = 29 sts of Row 1.

Row 3 (Cream – Connecting Row): Join Cream in first sc. Ch 1, sc in same sc. *Ch 2, sc in center st of next fan, ch 2, sc in next sc; repeat from * 6 more times. Fasten off.

(Stitch Count: 43 sts — 15 sc and 14 ch-2 spaces)

Row 4 (Red – Fan Row 2): Join Red in first sc. Ch 1, sc in same sc, 3 hdc in next sc (sits directly above the first fan), sc in next sc. *5 dc in next sc, sc in next sc; repeat from * 4 more times. 3 hdc in next sc, sc in last sc. Fasten off.

(Stitch Count: 39 sts — 8 sc, two 3-hdc fans, five 5-dc fans)

Note: Work only into the sc of Row 3. The ch-2 spaces are skipped and rest behind the fans.

Row 5 (Cream – Connecting Row): Join Cream in first sc. Ch 1, sc in same sc. *Ch 3, sc in center st of next fan, ch 3, sc in next sc; repeat from * 6 more times. Fasten off.

(Stitch Count: 57 sts — 15 sc and 14 ch-3 spaces)

Row 6 (Red – Fan Row 3): Join Red in first sc. Ch 1, sc in same sc, 3 dc in next sc, sc in next sc. *7 dc in next sc, sc in next sc; repeat from * 4 more times. 3 dc in next sc, sc in last sc. Fasten off.

(Stitch Count: 49 sts — 8 sc, two 3-dc end fans, five 7-dc fans)

You now have three red fan rows running down the center of the moon, framed and connected by cream rows. The piece should measure 3.75 in (9.5 cm) tip to tip and 1.5 in (3.8 cm) wide. Weave in all ends along the row edges before proceeding.

Border Instructions

The border is worked in Cream in rounds with the Right Side (RS) facing you throughout. Keep gauge consistent (15 sc = 2 in / 5.1 cm).

Corner Reference Map

• Corner A: First sc of Row 6 (Top Tip)
• Corner B: Last sc of Row 6
• Corner C: Foundation chain loop at same tip as Corner B
• Corner D: Foundation chain loop at same tip as Corner A

Round 1: Single Crochet Base Round

Join Cream in the first sc of Row 6.

• Corner A: Ch 1, 3 sc in same sc.
• Outer Edge: Work 1 sc in each of the next 47 sts of Row 6. Work 1 extra sc into the center dc of each 3-dc end fan (2 extra sts total).
• Corner B: 3 sc in last sc of Row 6.
• Side (Tip): Work 5 sc evenly along row ends of Rows 5 through 1.
• Corner C: 3 sc in foundation chain.
• Inner Edge: Working into free loops of foundation chain: sc in next 9 ch, sc2tog, sc in next 5 ch, sc2tog, sc in next 9 ch. (Reduces 27 ch to 25 sts).
• Corner D: 3 sc in last foundation chain.
• Side (Tip): Work 5 sc evenly along row ends of Rows 1 through 5.
• Close: Sl st to first sc to close round.

(Round 1 Total: 96 sc)

Round 1 Segment Breakdown Table

Segment	Path Description	Stitch Count Breakdown	Segment Total
Outer Edge	Corner A to Corner B	$1 + 49 + 1$	51 sts
Tip Side	Corner B to Corner C	$1 + 5 + 1$	7 sts
Inner Edge	Corner C to Corner D	$1 + 25 + 1$	27 sts
Tip Side	Corner D to Corner A	$1 + 5 + 1$	7 sts
Corner Centers	4 Tip Corners	1 per corner	4 sts
TOTAL	Entire Perimeter	—	96 sts

Round 2: Bobble Border Round

1. Sl st into center sc of Corner A and into next sc.
2. Ch 1, sc in same st as last sl st, sc in next 2 sts. (Completes first 3-sc group).

• Outer Edge: *Bobble in next st, sc in next 3 sts; repeat from * 10 more times. Bobble in center sc of Corner B. (Segment: 12 bobbles + 39 sc = 51 sts, plus Corner B bobble).
• Tip Side: Sc in next 3 sts, bobble in next st, sc in next 3 sts, bobble in center sc of Corner C. (Segment: 7 sts, plus Corner C bobble).
• Inner Edge: *Sc in next 3 sts, bobble in next st; repeat from * 5 more times. Sc in next 3 sts, bobble in center sc of Corner D. (Segment: 6 bobbles + 21 sc = 27 sts, plus Corner D bobble).
• Tip Side: Sc in next 3 sts, bobble in next st, sc in next 3 sts, bobble in center sc of Corner A.
• Finish: Sl st to first sc. Fasten off.

(Round 2 Total: 96 sts — 24 bobbles and 72 sc)

Pattern Math Note: Each segment length is a multiple of 4 plus 3 ($51 = 4 \times 12 + 3$; $7 = 4 \times 1 + 3$; $27 = 4 \times 6 + 3$). Because the repeat pattern is (3 sc, bobble), the final 3 sc of every segment leads directly into a corner center—placing a bobble on all four tips!

Assembly & Twisted Cord Hanger

1. Cut one 16 in (40.6 cm) strand of Red yarn and one 16 in (40.6 cm) strand of Cream yarn.
2. Hold both strands together and twist them tightly in one direction until kinking starts.
3. Fold the twisted strands in half, allowing them to twist back around themselves into a cord.
4. Thread the folded end through the top point (Corner A bobble).
5. Knot the loose ends together to form a hanging loop about 1.5 in (3.8 cm) tall. Trim ends cleanly and weave them into the back of the border.

Blocking & Finishing Instructions

1. Lightly mist the crochet moon with water until damp (not dripping).
2. Lay the piece RS up on a foam blocking mat.
3. Pin both tips first, ensuring a distance of 4.25 in (10.8 cm) between them.
4. Stretch and pin the widest central point to 2 in (5.1 cm) wide.
5. Open up each fan into a smooth arc and pin the center of each red fan.
6. Pin each bobble on the outer edge outward so it stands clear of the base stitches.
7. (Optional) Spray lightly with fabric stiffener or spray starch for enhanced shape retention.
8. Allow to dry completely before removing pins.

Quality-Control Checklist

• [ ] Row 1: 29 sc.
• [ ] Rows 2 & 4: 39 sts | Row 3: 43 sts | Row 5: 57 sts | Row 6: 49 sts.
• [ ] Fans: Each red row features 7 fans, ending with smaller fans at each tip.
• [ ] Border Counts: Rounds 1 and 2 each contain 96 sts.
• [ ] Bobbles: Exactly 24 bobbles in Round 2, with 1 bobble positioned on each of the 4 tips.
• [ ] Final Size: Measures 4.25 in (10.8 cm) tall $\times$ 2 in (5.1 cm) wide after blocking.

Troubleshooting & FAQ

• Piece stays straight instead of curving?Your fan stitches may be too tight. Ensure you work all 5 or 7 dc into a single stitch and skip the correct number of base stitches in Row 2.
• Inner edge is ruffling?Check your decreases. Confirm you completed both sc2tog decreases in Round 1. If it still ruffles, try working the inner edge with a 2.0 mm hook.
• Outer edge pulls or cups inward?Verify you worked the extra sc into each end-fan center in Round 1, and ensure your Round 1 stitches match your Row 1 tension.
• Bobbles do not align with corner tips?Recount Round 1 segments ($51, 7, 27, 7$, plus 4 corner centers) and fix any count errors prior to starting Round 2.
• Bobbles look flat?Pull the final yarn-over of the bobble tight, and ensure the securing single crochet immediately following it is worked firmly.

Care Instructions

Hand wash gently in cool water using mild detergent. Gently press out excess moisture between clean towels (do not wring). Reshape and lay flat to dry, re-blocking with pins if necessary.

Happy Crocheting!

Categories

• Crochets
• Free Patterns
• Ornaments & Decor

Tags

bobble border celestial crochet crescent moon crochet crochet ornament fan stitch free crochet pattern thread crochet two-color crochet